PARK
ELECTRIC

Metal Enclosed
Load-Interrupter Switchgear
With S&C Components
4.16kV through 34.5kV
UL Listed to 15KV    
lightning2.gif
Jump to 15kV Switch and Metering Cubicle

  • Welded construction for security and strength
  • Wide-view windows allow inspection of switches from outside
  • Louvers and space heaters reduce moisture
  • Sturdy, lockable latches
  • Manufactured to applicable utility standards
  • Hot dipped galvanized base
picg3.gif
picf1.gif
  • Interrupter switches are factory adjusted
  • No taping of bus connections
  • Built-in access control eliminates expensive fencing
  • Generous access and ample work space
  • Heavy Duty Hinges
  • Spare fuses store in built in racks

Configurations are Limited Only by Your Imagination

Each unit features welded steel construction with wide-view windows that allow checking switchgear without opening mg doors. Corrosionproof, rainproof louvers at the bottom and top, and space heaters inside each unit maintain air cir- culation to keep the interior dry. Three point cam-type, high- strength latches seal the doors shut. The lockable latches and screened louvers discourage tampering.
Wide bulkhead doors provide easy access to all bays. Each full-length door has durable heavy-duty hinges with brass pivots. Foot operated holders lock the doors open and give ample room for pulling cables and making terminations.     All interrupter switches are maintenance-free and are available in 200, 600 and 1200 amp ratings. S&C Power Fuses provide full-fault-spectrum protection. The switches are manually operated by nonremovable switch handles. Bus connections are silverplated copper for long life. Continuous ground bus in multibay lineups has a short-circuit rating equal to that of the integrated assembly. The MV meter bays are built to utility specifications and multibay lineups are assembled with a minimum of interbay bolting. Call today and discuss your requirements with a Park sales representative. pich2.gif
SPECIFICATIONS Amperes, RMS

Ratings of S&C Mini-Ruptor Switches

kV Amperes, RMS Fault Close
Duty Cycle*
Cont. Interrupting Momentary
& Fault Close
(Assym kA)
Nom. Max.Des. BIL Load Cap.Mag.
5 5.5 60 600 600 35 21 40 2
5 5.5 60 1200 1200 35 21 61 2
15 17 95 600 600 35 21 40 2
15 17 95 1200 1200 35 21 61 2
25 27 125 600 400 100 21 40 2
34.5* 38 150 600 600 35 21 28 2
* Only available as Alduti SW

Physical Sizes & Park Numbers

Park No. Voltage
kV
Height Depth Width
PM 315-4.8 4.8 104" 44" 42"
PM 315-15 15 104" 44" 42"
PM 315-25 25 120" 44" 47"
PM 315-35 34.5 130" 70" 60"
PM 315-CT PT/CT Bay To Match To Match 42"
PM 315-WM Meter Bay To Match To Match 42"
To order specify current rating & fuse size.

Click for Cabling Locations


15kV Primary Switch and
Metering Cubicle
[PM123] Featuring S&C
Components
4.16KV - 34.5kV [UL Listed up to 15KV]  
lightning2.gif

  • Welded construction for security and strength
  • Wide-view windows allow inspection of switches from outside
  • Louvers and space heaters reduce moisture
  • Sturdy, lockable latches
  • Manufactured to applicable utility standards
  • Hot dipped galvanized base
  • Interrupter switches are completely factory adjusted
  • No taping of bus connections
  • Built-in access control eliminates expensive fencing
  • Generous access and ample work space
  • Heavy Duty Hinges
  • Spare fuses store in built in racks
  • Configurations are Limited Only by Your Imagination

    Each unit features welded steel construction with wide- view windows that allow checking switchgear without opening mg doors. Corrosionproof, rainproof louvers at the bottom and top, and space heaters inside each unit maintain air cir- culation to keep the interior dry. Three point cam-type, high- strength latches seal the doors shut. The lockable latches and screened louvers discourage tampering. Wide bulkhead doors provide easy access to all bays. Each full-length door has durable heavy-duty hinges with brass pivots. Foot operated holders lock the doors open and give ample room for pulling cables and making terminations. All interrupter switches are maintenance-free and are available in 200, 600 and 1200 amp ratings. S&C [TRADEMARK GOES HERE] Power Fuses provide full-fault-spectrum protection. The switches are manually operated by nonremovable switch handles. Bus connections are silverplated copper for long life. Continuous ground bus in multibay lineups has a short-circuit rating equal to that of the integrated assembly. The MV meter bays are built to utility specifications and multibay lineups are assembled with a minimum of interbay bolting. Call today and discuss your requirements with a Park sales representative.

    Ratings of S&C Primary Switch

    kV Amperes, RMS Fault Close
    Duty Cycle*
    Cont. Interrupting Momentary
    & Fault Close
    (Assym kA)
    Nom. Max.Des. BIL Load Cap.
    15 17 95 600 600 35 21 40 2

    Physical Sizes & Park Numbers

    Park No. Voltage
    kV
    Height Depth Width
    PM 123-4.84.882"60"40"
    PM 123-151582"60"40"
    To order specify current rating & fuse size.

    NOTE: Front and rear clearance of 4' required, 2' on right for handle operation.

    Click for Cabling Locations

    Home | 600V Power Gear | Switchboards | 15 kV LI Gear | Busway


    park4.gif PARK DETROIT
    PARK ELECTRIC
    PARK FABRICATING
    POWER DISTRIBUTION SYSTEMS
    19197 Sherwood Avenue
    Detroit, Michigan 48234
    313/366-2200
    Fax: 313/366-1540
    Email: parkdet@ix.netcom.com

    Send Us Email

    Comments to jnr at Insight Web Designs